newbee saying whats up

breefee_BII · Post by **breefee_BII** » Sun Aug 06, 2006 11:30 pm

I just got a 86 Bronco II from my folks which is where it sat for 5 years, it's an XLT 2.9 liter, 4wd, perfect interior until today when I ripped it all out and took it down to the metal to make in an offroader only. I plan to cut the top, rip out the fender wells, and put a 4 in rough country lift, and a 3 in body lift on it but would like to eventually turn it into a D44 conversion with coils, so any help would be greatly appreciated. i can't wait to get to know all of you this group seems like the coolest forum i've ever been a member of. Any tips from you guys would be great and i'll post pics soon of the gutting on the Breefee"freebee".

OOHRAh

Phillippi · Post by **Phillippi** » Mon Aug 07, 2006 11:42 pm

Welcome Utah brother. Good luck with your b2. Take lots of pics. If you have questions ask here. There is lots of guys who have tons of experience.

Steve G · Post by **Steve G** » Tue Aug 08, 2006 1:41 pm

And there is me, with no real experience but likes to read and look at how things are done...

desrt_rat · Post by **desrt_rat** » Thu Aug 10, 2006 6:26 pm

sounds like you have some great plans, and welcome to the site.