nail hole in oil filter

Real world tips and tricks for the do-it-yourself ethusiast. Tools and parts that make life easy, and simple fabrication tips and tricks.
User avatar
clem
Posts: 244
Joined: Tue Apr 01, 2008 2:17 pm
Location: Nova Scotia

nail hole in oil filter

Postby clem » Mon Nov 10, 2008 7:40 pm

Just got finished doing some oil changes and remembered a little trick, punch a hole in the oil filter (hammer and nail) before removing the filter lets it drain, so you don't get oil down your elbow! :redneck:
'87 bII d44,9",np435/205and a 302 ( on hold)
'73 vw bug
'70 vw camper van
'98 jeep tj
2010 ranger
'56 international s110

User avatar
EBSTEVE
Posts: 291
Joined: Mon Apr 26, 2004 8:10 am

Re: nail hole in oil filter

Postby EBSTEVE » Tue Nov 11, 2008 12:56 pm

Good tip, another is use aluminum foil to direct the oil if needed to keep stuff clean. On my motorcycle the oil filter is above the header so if I don't use foil I have a huge mess.
Ranger 5.o, needing another project like Rosie O'Donnell needs another M&M.

flatlander42
Posts: 1
Joined: Sun Nov 28, 2010 5:43 pm
Location: central USA

Re: nail hole in oil filter

Postby flatlander42 » Tue Nov 30, 2010 10:10 am

We used to punch a hole in the oil filters on the garbage trucks we changed oil on. That was a Ton of oil in those filters. Way easier!

User avatar
tekatlarge
Posts: 960
Joined: Tue Jan 17, 2006 8:54 am
Location: Kent, Worshington

Re: nail hole in oil filter

Postby tekatlarge » Tue Nov 30, 2010 5:39 pm

Let me add 1 more oil filter tip.
Take a small gallon size trash bag and wrap it over the filter, unscrew the filter and the oil spillage runs into the trash bag.
The Tek @ Large
Kent,Worshington
I was borne under a rock. So what's your excuse?


Return to “Tools, Parts, and Fabrication”

Who is online

Users browsing this forum: No registered users and 1 guest