Spring Problems! Please help
Spring Problems! Please help
i just lifted my B2 four inches, and now that it is done, the front wheels sit like this \-o-/ they are five degrees out. the springs look as if they want to pop out and they do not seat very well, so i believe they are to long and stiff. can someone with a four inch lift please measure their springs (under load is ok) and possibly post a pic so i can see how they fit. thank you.
- Mud Addict
- Posts: 202
- Joined: Mon Dec 27, 2010 9:36 pm
- Location: Enumclaw, WA
Re: Spring Problems! Please help
Does your lift brackets have two sets of holes? If so try moving to lower hole. Where you at in Washington?
Re: Spring Problems! Please help
Did the kit you used come with drop brackets for the axle? Anything over 2 inches of lift they are a must. Also,you'll need camber bushings.
I have 5" on mine with 3 deg camber bushings,if I remember correctly.
I have 5" on mine with 3 deg camber bushings,if I remember correctly.
Re: Spring Problems! Please help
Only pics I have at the moment. First one shows the bracket you need. There are actually 2.
The second is the camber bushing..the big castle but deal in front of the spring.
The second is the camber bushing..the big castle but deal in front of the spring.