After installing 2 inch lift....

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
b2 bomber
Posts: 7
Joined: Thu May 20, 2010 1:36 pm
Location: iowa

After installing 2 inch lift....

Post by b2 bomber »

My tires on my 88 b2 are tilting in slightly, will a canter/caster adjustment take care of this or will I need to do something else??
red6x6stag
Posts: 9
Joined: Thu Apr 15, 2010 6:43 pm
Location: washington

Re: After installing 2 inch lift....

Post by red6x6stag »

just adjust ur tie rod for right now.
RakerBill60
Posts: 70
Joined: Sun Jul 11, 2010 11:19 pm
Location: Idaho
Contact:

Re: After installing 2 inch lift....

Post by RakerBill60 »

Are they tipping in on the top, or front? If they are on the front, then you can adjust your toe-in via your tie rods.
If they are tipped in at the top, then it is a camber adjustment.
Either way, it is best to have it done by a reputable shop to avoid any driveability or stability issues.
Post Reply