Worth the trouble?

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
yardboss
Posts: 1
Joined: Sat Jan 30, 2010 6:27 am

Worth the trouble?

Post by yardboss »

Found a 1984 bronco 2 with a drivers side busted knuckel for 400. I havent seen it in person but everything works ok from what he says. Is it worth fixin for the 400 bucks?
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: Worth the trouble?

Post by Ranger Dave »

go look at it first.how did the knuckle get broke?? musta hit sumpin awfull hard
forman621
Posts: 49
Joined: Mon Jul 06, 2009 1:22 am

Re: Worth the trouble?

Post by forman621 »

the knuckle doesnt break while driving down the road. the owner must have beat that thing and finanly hit something when he was four wheeling. i wouldnt do it he probably beat it up. you can find better ones for the money.
drofman
Posts: 487
Joined: Sun Dec 27, 2009 9:36 am
Location: san dirgo

Re: Worth the trouble?

Post by drofman »

I know people here like them bottom t-stat motors but I like not having to adjust valves and messing with the carb. and if you just overheat it a little the heads pop. I know 2.9 heads don't like the heat also but atleast I can find them.
Post Reply