Will Bronco II tranny bolt up to a 5.0

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
eziekel
Posts: 1
Joined: Tue Oct 21, 2008 9:59 am

Will Bronco II tranny bolt up to a 5.0

Post by eziekel »

doesnt matter auto or stick, just wanting to know thanks
Remember when your young and you think your dad is Superman, then you grow up and realize he's just a drunk who wears a cape
JEEPSTER1972
Posts: 9
Joined: Thu Sep 25, 2008 3:51 am

Re: Will Bronco II tranny bolt up to a 5.0

Post by JEEPSTER1972 »

:hmmm: NO! even if it did it would last till you tried to drive it!
vabronconut
Posts: 268
Joined: Thu Mar 20, 2008 4:04 am
Location: CENTREVILLE, VA

Re: Will Bronco II tranny bolt up to a 5.0

Post by vabronconut »

not even close, sorry a new trany will be needed for this swap. you can use any trans that you find behind a 302, 351w, 289, 255, or even the straight six 300 motors
87 bronco II 93 5.0 HO, NP435, 44 sas
Post Reply