Front disc removal

Willie Two · Post by **Willie Two** » Wed Jul 04, 2007 7:02 am

Do I really need that that special socket to remove the large nut on the front discs as said in the manual ??? Thanks for the advice. It's a Bronco II 1984 4 x 4

garagedude · Post by **garagedude** » Wed Jul 04, 2007 7:39 am

Yup, I had to buy one. I found mine at Napa. You will bugger up the nut if you use a hammer and chisel.

Post by **Nobody** » Wed Jul 04, 2007 8:51 am

It will make life much easier.

Willie Two · Post by **Willie Two** » Wed Jul 04, 2007 11:23 am

Thanks

NCBII · Post by **NCBII** » Tue Jul 10, 2007 6:45 pm

for my manual hubs a big screw driver worked, for my autos ha that was a quick run to the parts store for a socket

84_4x4 · Post by **84_4x4** » Sun Jul 22, 2007 7:28 pm

Nobody wrote:It will make life much easier.

very much so and get a quality one the cheap ones are harder to use while torqeing