Hi There,
Does someone knows the part number for the gas hose that goes from the fuel filter to the engine in a BroncoII 89. The hose in my Bronco is leaking too much, the oring is not sealing correctly. It cannot be replaced by a simple hose connection.
Thanks in advance,
GAP
Leaking gas problems
you should have the 2.9L so any BII or ranger with the 2.9L should work for you to get the line off of. if you just want the part number the local ford dealer should be able to help you out.
71 Bronco - twin sticked, full width, 2" lift, wristed arm, lots of rust...
http://www.catalystcycles.com
http://www.catalystcycles.com
I had the same problem and i got new line and couplers for it at napa. They had them hanging on a shelf .... just need to know which size it is there are only 2 sizes. the hoses come with one end for the fuel pump or tank or filter you only need the size.i figure that the ford dealer will rape you for alot more than napa
well, i tried to soak mine in hot water and it didnt work for sh@!. so then i got a heat gun (best $20 ever spent) and still just screwed the hoses up because the barbed fittings were to long.
then i found out that the ones i had bought are no longer made and a different company makes them. the new ones had a much shorter fitting for swedging the hoses together and came w/ those high preasure crimp clamps. these ones worked very well w/ the heat gun.
then i found out that the ones i had bought are no longer made and a different company makes them. the new ones had a much shorter fitting for swedging the hoses together and came w/ those high preasure crimp clamps. these ones worked very well w/ the heat gun.
i did a search and looked through the threads and still didn't find what i needed!