Rewiring Harness

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
Warlock489
Posts: 6
Joined: Sun Aug 08, 2004 1:14 pm
Location: Omaha, NE
Contact:

Rewiring Harness

Post by Warlock489 »

What guage wire is the main harness made out of on the 2.9. It is 18 guage?

I'm thinking of redoing my harness cause some of the wires are brittle and falling apart. Is there any place that I can get spools of wire from that will work? I've been searching the web all night and I can't find any place that sells it.
b2binbad
Posts: 232
Joined: Fri Jun 11, 2004 7:40 pm
Location: Crawlorado
Contact:

Post by b2binbad »

Napa or Checker will have the wire that you'll need. As for as the size ?? 18 guage is pretty small wire. Probably more like 10 to 14.
You're right, I DON'T understand that Jeep thing ;)
DBrown
Posts: 1545
Joined: Mon Apr 19, 2004 5:21 am
Location: Bowling Green, KY

Post by DBrown »

get a chiltons manual it should give you all the specs you need.
71 Bronco - twin sticked, full width, 2" lift, wristed arm, lots of rust...

http://www.catalystcycles.com
Post Reply