1984 Bronco II Flywheel
1984 Bronco II Flywheel
I'm in need of some advice. I've been struggling for years to get my 1984 manual Bronco II to start properly. It keeps grinding down the flywheel gear ring. I keep buying new ones as several attempts with new starter engines/solenoids have made no difference. Have tried spacers/shims but again no luck. I've even attempted to machine the flywheel as it was warped, still no luck. I can't seem to find a new flywheel for the 1984 Bronco II anywhere online. It seems to be the only thing I can change that hasn't yet been addressed. Any ideas how to solve this issue overall and where can I find a new flywheel? Need to have it shipped to Lisbon, Portugal. Any advice welcome!!
Re: 1984 Bronco II Flywheel
The 2.8L CARB.
Does the 2.9L flywheel bolt up to the 2.8L?
There was 2 trannys, the TOYO and the MISUBISHI.
Maybe check to see if you got the right flywheel.
Does the 2.9L flywheel bolt up to the 2.8L?
There was 2 trannys, the TOYO and the MISUBISHI.
Maybe check to see if you got the right flywheel.
Re: 1984 Bronco II Flywheel
I see that rockauto has shims.
Maybe for the 2.9l flywheel?
I do see that rockauto has a flywheel for a 85 B2 with a 2.8L.
Maybe for the 2.9l flywheel?
I do see that rockauto has a flywheel for a 85 B2 with a 2.8L.