ground wire issue
-
- Posts: 2
- Joined: Sun Aug 03, 2014 7:08 pm
- Location: Pennsylvania
ground wire issue
I`m having a ground wiire problem. I turn the key and fuel pump doen`t work. I put a new fuel pump in. bought a new plug that you put together yourself. I put the tank back in. I also put a new relay in for the fuel pump. when I tried to jump start it one of the wires hooked to the selonoid started smoking.
- tekatlarge
- Posts: 992
- Joined: Tue Jan 17, 2006 8:54 am
- Location: Coastal, Worshington
Re: ground wire issue
Just throwing out a couple of suggestions here. First off is it possible you swapped the wires into the wrong side of the plugs. Also if that is not the case then look for a pinched wire between the pump connector and the pump. Do you have an ohmmeter available? If so check the resistance between the high and low terminals. it should be a low resistance but Not Zero resistance.
Check out the wire from tank to relay real close maybe your problem is there!
Check out the wire from tank to relay real close maybe your problem is there!
The Tek @ Large
Coastal,Worshington
Livin life on the dole on the Coast
Coastal,Worshington
Livin life on the dole on the Coast
-
- Posts: 2
- Joined: Sun Aug 03, 2014 7:08 pm
- Location: Pennsylvania
Re: ground wire issue
thank you I`ll check into trying those procedures to see if thats my problem