Been on a mission for a while to get this BII back on the road after I started tearing it apart to replace gaskets and clean up the caked on oil everywhere.
Got more photos to post but just wanted to post this one up of the clean engine getting put back together.
Thanks for checking it out!
jefe's 87 Eddie Bauer BII
Re: jefe's 87 Eddie Bauer BII
got to put some duct tape on those intake holes so nothing falls in there
Re: jefe's 87 Eddie Bauer BII
Nice clean look to the valve covers, that is a shiny frost plug. Nice Job
FYI: I have seen many people put together engines only to blow them up after first crank because something fell into the intake ports, or the oil filler, or the water pump inlet. Perhaps I am jumping the gun, (you probably tape everything up after the picture), just looking out for another Bronco II owner.
FYI: I have seen many people put together engines only to blow them up after first crank because something fell into the intake ports, or the oil filler, or the water pump inlet. Perhaps I am jumping the gun, (you probably tape everything up after the picture), just looking out for another Bronco II owner.
Re: jefe's 87 Eddie Bauer BII
Thanks for the tips...and yea, I've got things covered up post picture taking.