Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
adc1986
Posts: 6 Joined: Wed Sep 28, 2011 7:28 am
Location: North Carolina
Post
by adc1986 » Wed Sep 28, 2011 7:43 am
I got a 302 out a 90 f150 was wondering if the round firewall plug is the same as bronco 2. I am also curious If any one has used the advanced adapter that let's you use the 2.9 5 speed?
kaytor692
Posts: 22 Joined: Tue Aug 30, 2011 7:29 pm
Location: ont canada
Post
by kaytor692 » Thu Sep 29, 2011 2:18 pm
with that adapter do u run the 302 bell housing and the 2.9 tranny?
adc1986
Posts: 6 Joined: Wed Sep 28, 2011 7:28 am
Location: North Carolina
Post
by adc1986 » Thu Sep 29, 2011 5:07 pm
Ya it says it works on the 4 & 5 speed. I guess that makes sense since they have the same bolt pattern