Lower Intake Manifold gasket

[jefe]

I've never installed a gasket like this before, so I'm curious where I lay down some RTV sealant on this...

On the cork edges and everywhere there is blue?

Thanks for any help.

[justinC]

if its an intake gasket you really dont want to use rtv,but if you fell you must use it only on the areas that oil or coolant will pass

[DBrown]

that blue stuff works as RTV...I have put it where the cork meets the block and it works well. the cork never realy seals well

[Ranger Dave]

just use it at at the ends of the cork gaskets,see the blue around the ports, thats the sealer,HELLO

[jefe]

Ok. Good info. Thanks.