4.0 in ranger help plz

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
red6x6stag
Posts: 9
Joined: Thu Apr 15, 2010 6:43 pm
Location: washington

4.0 in ranger help plz

Post by red6x6stag »

can u put a explorer 4.0 into a ranger? if so would it be good to put in a body lift in?
User avatar
04sd
Posts: 62
Joined: Wed Sep 07, 2005 4:40 am
Location: Lehigh Valley, PA

Re: 4.0 in ranger help plz

Post by 04sd »

You need to use a 4.0 trans with the engine. Putting in the engine is the easy part, wiring is a little more difficult. No need for a body lift.
Bill
1990 BII, 4.0, (sold)
2005 F150 SCrew
'84 Ranger under construction
kieth
Posts: 15
Joined: Thu Sep 23, 2010 9:52 pm
Location: Vancouver, WA

Re: 4.0 in ranger help plz

Post by kieth »

yes it will go in.
your going to want all the doners wires tho. and computer.
a body lift is not needed. it will give you a little more room with the transmission and the fire wall tho
Post Reply