What kind of headers will fit on an '84 B2 (original V6). I would also like to know which carb and breather would fite. I want to give the original engine more "balls". I alredy know which exhaust I'm puting in (Cat-Back Performance Dual Exhaust System with Resonator Tips from LMC Trucks). I'm going to be rebuilding it with new parts.
Any eninge info would be apriciated.
Engine info needed.
- C_Sanchez_A
- Posts: 48
- Joined: Wed May 13, 2009 8:39 am
- Location: Ontario, Canada
Engine info needed.
1984 - Ford - Bronco II
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000
Re: Engine info needed.
I think there was only a few manufacturers that built headers for the 4x4 BII/Ranger and don't think they still do, but if you look up the 2150 carb it was and still is one of the best carbs made. The 2.8 you can get an Offenhauser intake for that should help with performance though.
- C_Sanchez_A
- Posts: 48
- Joined: Wed May 13, 2009 8:39 am
- Location: Ontario, Canada
Re: Engine info needed.
What where the manufactuers?Ruffinit wrote:I think there was only a few manufacturers that built headers for the 4x4 BII/Ranger and don't think they still do
1984 - Ford - Bronco II
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000
Re: Engine info needed.
Bill
1990 BII, 4.0, (sold)
2005 F150 SCrew
'84 Ranger under construction
1990 BII, 4.0, (sold)
2005 F150 SCrew
'84 Ranger under construction
- C_Sanchez_A
- Posts: 48
- Joined: Wed May 13, 2009 8:39 am
- Location: Ontario, Canada
Re: Engine info needed.
Thank you
I take it those are the only ones I can get.
I take it those are the only ones I can get.
1984 - Ford - Bronco II
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000
- C_Sanchez_A
- Posts: 48
- Joined: Wed May 13, 2009 8:39 am
- Location: Ontario, Canada
Re: Engine info needed.
Would the Weber carburetor conversion kit work?
http://www.lmctruck.com/icatalog/fr/full.aspx?Page=49
http://www.lmctruck.com/icatalog/fr/full.aspx?Page=49
1984 - Ford - Bronco II
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000
Re: Engine info needed.
Edelbrock makes headers and holly makes a 2 barrel that bolts up as long as you dont have the a4ld. The trouble is that the og carb is computer controlled and you will have to do the duraspark conv to run anything but stock