thought i would start something

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
User avatar
kolton
Posts: 80
Joined: Mon Oct 06, 2008 6:49 pm

thought i would start something

Post by kolton »

who all is still out there? this place has gotten pretty slow nowadays.. :(

what projects are yall into? planning on starting?
Shake and Bake
User avatar
tekatlarge
Posts: 992
Joined: Tue Jan 17, 2006 8:54 am
Location: Coastal, Worshington

Re: thought i would start something

Post by tekatlarge »

I am not here I am over there.
The Tek @ Large
Coastal,Worshington
Livin life on the dole on the Coast
User avatar
Nobody
Posts: 2232
Joined: Sun Apr 18, 2004 6:38 pm
Location: Stanwood, WA.
Contact:

Re: thought i would start something

Post by Nobody »

we're slower than a triple stacked atlas :frown: I suppose I should fix that.

I need to get back to work on my EB. I still need to build shock mounts all the way around, cage and new bumpers...hopefully a winch someday. Once I move, I'll be looking to pickup another Bronco II.
OBXFHB
Posts: 28
Joined: Tue May 19, 2009 10:55 am

Re: thought i would start something

Post by OBXFHB »

im on everyday to see wats up. i chopped the top off my 89b2, fabricated a snorkel, now im installing full size axels with 36s
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: thought i would start something

Post by Ranger Dave »

broncofan
Posts: 78
Joined: Tue Aug 18, 2009 1:12 pm
Location: FT. Hood, TX.

Re: thought i would start something

Post by broncofan »

I check every week to see whos doing what, espically the 5.o swaps. getting ready to do 1 too. lining up a efi 5.0 for me for $100.00 no intake though or computer, might just carb it. 2.8 not enough power for me and runs like crap.84 4x4 ive had for 25 years 2nd 2.8 its had. like everyone else i have to go slow and save money where i can.
2013 Taurus SHO LMS V11 tune, 06 F150 Harley-Davidson Edition,03 Mustang GT Conv, 97 Jeep GC Laredo 5.2, 84 BII
Rockcrawler
Posts: 588
Joined: Sun Apr 18, 2004 10:41 pm
Location: San Juan Bautista, CA
Contact:

Re: thought i would start something

Post by Rockcrawler »

I have been building up another 351 sense i drowned my in the mud pit distroying my old 351! got a nice rod knock now.
Image
Image
And those are 44's! If you guys dont remimber my build its a bronco II frame.

and my oil after the run in the mud.
Image
Image
User avatar
kolton
Posts: 80
Joined: Mon Oct 06, 2008 6:49 pm

Re: thought i would start something

Post by kolton »

its great to see the feedback.

Rockcrawler! man i used to read your build thread all the time till i lost the link! haha, i always thought your rig was awesome. cept for the muddy motor, sounds like it turned out the way you wanted.

RangerDave, what rig is that going under? and i was reading the other day... how is your twin tranny set up holding up? ive heard about this with one of the local crawlers, but ive never seen pics or how its done.

OBXFHB, what axles? someday when mine isnt a DD, i want to throw the D60's off of my old f350 parts truck under the Bii. but thats after the new power house gets put in. my snorkel is still my favorite little project that i did. it was probably the easiest one, but people love it.

ive just been saving up the $$ to rebuild my transmission. and then im looking into grabing a D35 off of an xploder. gonna do the 44 outers and spindles and beef up the beams. custom long arm kit and XJ coils. then im going to get the D35 carrier out of a heep so i can get the ARB system i want.
i want to do the 5.0 swap in the future, so ive been following the posts. sounds like a fairly simple procedure. but i just rebuilt my 2.9, WAIT, my 3.0 (haha every bit counts right :tongue: )

thanks for all the feedback. keep it commin!
kolton
Shake and Bake
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: thought i would start something

Post by Ranger Dave »

kolton wrote:


RangerDave, what rig is that going under? and i was reading the other day... how is your twin tranny set up holding up? ive heard about this with one of the local crawlers, but ive never seen pics or how its done.
its going under this
Image
the dual tranny is on hold,still
Rockcrawler
Posts: 588
Joined: Sun Apr 18, 2004 10:41 pm
Location: San Juan Bautista, CA
Contact:

Re: thought i would start something

Post by Rockcrawler »

Yeah the truck has turned out pretty good. I can drive it on the road again sense when it was a bronco II it was off road only couldnt pass smog but now i have no smog. Here is how far ive gotten into the engine. not bad for only 3 hours of work.
Image
Image
User avatar
RClem
Posts: 94
Joined: Sun Oct 25, 2009 5:38 am
Location: Yakima

Re: thought i would start something

Post by RClem »

Started this in the spring with this:
Image
Then I found this, it looked as good all over as what you see and we drove it home:
Image
Now it looks like this:
Image
And the B2 looks like this:
Image
Got the D35 in and the tires and rims from the X, rounded up a M5od-r1 and 1354m transfer, will get the 8.8 put in sometime, soon I hope,
and maybe get it running in the spring.
Still a ton of work to do on it, just keep doing a little here and there. Seems every time I get started on it someone (wife or granddaughter) wants something done for them, maybe I need to send them both to a far away land, Uh Hu!
I visit here pretty much daily, but ever so often I will miss a day. Kolton is right tho, we have been really dead as of late.

Ray
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: thought i would start something

Post by Ranger Dave »

i need a set of front rear spring mounts for a xplorer
Rockcrawler
Posts: 588
Joined: Sun Apr 18, 2004 10:41 pm
Location: San Juan Bautista, CA
Contact:

Re: thought i would start something

Post by Rockcrawler »

Thats going to look good and have some good running gear in it. Cant wait to see it.
Image
User avatar
tekatlarge
Posts: 992
Joined: Tue Jan 17, 2006 8:54 am
Location: Coastal, Worshington

Re: thought i would start something

Post by tekatlarge »

This is what I have been working on for a couple of months now.
http://www.tekatlarge.com/Automobiles/PhillStang1.htm
The Tek @ Large
Coastal,Worshington
Livin life on the dole on the Coast
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: thought i would start something

Post by Ranger Dave »

mitght wanna check the fuel line. nice stang
Image
Post Reply