Trouble with injectors

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
89BRONCOII16
Posts: 6
Joined: Thu Jun 26, 2008 4:18 pm

Trouble with injectors

Post by 89BRONCOII16 »

I recently had to replace my injectors and now the one all the way in the back is leaking and i cant get it to seal up. Any suggestions?
Definition of 4 wheeling. Spending to much money on parts
so you can brake them and buy more parts.
Just gotta love it!
Top
DBrown
Posts: 1545
Joined: Mon Apr 19, 2004 5:21 am
Location: Bowling Green, KY

Re: Trouble with injectors

Post by DBrown »

I would pull it back out and check the o-ring you might have cliped it going in and that might cause it to leak.

also be carefull when pulling them out they can break pretty easy
71 Bronco - twin sticked, full width, 2" lift, wristed arm, lots of rust...

http://www.catalystcycles.com
Top
89BRONCOII16
Posts: 6
Joined: Thu Jun 26, 2008 4:18 pm

Re: Trouble with injectors

Post by 89BRONCOII16 »

Yep thats what it was i nicked one. thanks
Definition of 4 wheeling. Spending to much money on parts
so you can brake them and buy more parts.
Just gotta love it!
Top
Post Reply

Return to “Bronco Tech”