Parts swap question

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
DEET0607
Posts: 4
Joined: Mon Jan 19, 2009 5:05 pm

Parts swap question

Post by DEET0607 »

90 bronco 2 with a rebuilt 2.9. if i keep it I will need a new transfer case(or one that works) and a few other minor parts. Mainly the transfer case or even a new transmission if I swap the engine. any suggestions on where to buy a reasonably new or the best vehicle to pull the parts from for the transfer case or transmission?
Top
User avatar
Ruffinit
Posts: 183
Joined: Thu Oct 04, 2007 4:50 pm
Location: Muscatine, Iowa

Re: Parts swap question

Post by Ruffinit »

I would suggest another BII, Ranger or Explorer. From your earlier post it sounds like you may only need the electrical motor for your transfer case.. Think simple first.
Top
Post Reply

Return to “Bronco Tech”