Looking to Buy a BII...Could use Some help

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
climber87
Posts: 4
Joined: Mon Jun 30, 2008 1:22 pm

Looking to Buy a BII...Could use Some help

Post by climber87 »

I'm looking to buy a BII and would like a standard and a 4x4 at that. Besides that...what should I look for and what year would be best?
89BRONCOII16
Posts: 6
Joined: Thu Jun 26, 2008 4:18 pm

Re: Looking to Buy a BII...Could use Some help

Post by 89BRONCOII16 »

It depends on what you want to do with it really. If it were me i would look for a 90' with the a five speed trany and manuel transfer case they have the stronger dana 35 front end. But I'm no expert, the only thing i would be wary of is i think the 86' models were more prone to engine problems. I'm sure there are guy's on here that can tell you more just thought i'd put my two cents in. :smilie:
Definition of 4 wheeling. Spending to much money on parts
so you can brake them and buy more parts.
Just gotta love it!
greenmachine89
Posts: 142
Joined: Sat Sep 30, 2006 9:44 pm
Location: Battle Ground, WA
Contact:

Re: Looking to Buy a BII...Could use Some help

Post by greenmachine89 »

I bought an 89 and so far no engine problems at all. 89 and 90 had the new body style and the later 90's had the 35 the some 90's did still come with the 28 so be careful. Pretty mush stick with the b2's that have the 2.9 not the 2.8.
1989 Bronco II 8.8 rear Dana 30 Jeep front---RIP
1991 Exploder 6 inch lift 33's---RIP
1989 Bronco II Stock with 32 BFG KM1's
Post Reply