Mounting Rad in back of Bronco

[rusty]

I got a chop top bronco 2 and want to mount my rad in the back. I have a 302 c6 1356 with fullsize dana 44 and 9 nich but dont know if the water pump will work or how to plum the system can so one help. thanks

[Nobody]

I'm pretty sure that you can use your stock waterpump. I'm not sure about the plumbing though. If you use PVC it would have to rated for the high temps.

[onewyr]

You should use aluminum piping it will help disipate heat but might get to cool

[Rockcrawler]

I used water pipe thats made from steal so i can weld it. I used the stock water pump but make sure not to run the car without water because it will tear up the seals on the water pump. here is a link to mine http://forum.sanjuanrockcrawlers.com/sh ... 375&page=2

[Nobody]

I sort of thought you had a rear mounted radiator, but I was pretty sure you had a back seat too.

[Rockcrawler]

I used to have a front one till i did the 5.8L swap because i wanted more space up front.