i have a 86 bii and with a 3in body lift next step v8 swap

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
3barSranch
Posts: 18
Joined: Wed May 16, 2007 8:43 pm
Location: i town iowa
Contact:

i have a 86 bii and with a 3in body lift next step v8 swap

Post by 3barSranch »

i have a 3in body lift and want to put a 302 into. i have found a c6 trans with a transfer case from a 80s f150. can i make it fit. and whats it worth.
cuz the chick dig it
3barSranch
Posts: 18
Joined: Wed May 16, 2007 8:43 pm
Location: i town iowa
Contact:

Post by 3barSranch »

thanks yall
never mind :flipoff: :flipoff: :flipoff:
cuz the chick dig it
Paul
Posts: 231
Joined: Tue May 01, 2007 4:57 am
Location: Marysville, Indiana
Contact:

Post by Paul »

:hmmm:
well i would have liked to help you on that question but i did the 4.0 swap becasue i knew stuff would bolt up, and i wasnt going to say it would or wouldnt when i didnt have an answer for the question, ask d brown or nobody they should be more familiar with the 302 swaps.
1989 Bronco II 4x4
Mitsubishi 146 5 speed,
Stock D35
235/75/15
4.0L upgrade
NO LIFT
Crop Top
Post Reply