updated

This is the place to Blog your buildup. If your Bronco II isn't in here, it should be!
Please, one topic per vehicle.
Post Reply
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

updated

Post by Ranger Dave »

now with 33X12.5's on centerline autodrags


Image

Image
84_4x4
Posts: 229
Joined: Mon Sep 04, 2006 8:36 pm
Location: Southern Indiana
Contact:

Post by 84_4x4 »

those rims are shinny for that paint need to put some chrome pinstriping or something to even out the shinnyness
Get Out Of Way Or Im Comin Over Ya
Bob Myers
Posts: 274
Joined: Sat Apr 24, 2004 6:33 am
Location: Paris,Ky
Contact:

Post by Bob Myers »

Can you easily lower the front by about 2"? It would look more aggressive and level.
88 BII,4.0, 9"& D44/4.88 locked. 1350/1354 doubles
92 XJ-wifes toy
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Post by Ranger Dave »

theres only 1in diff between the front and back. the 302 will take care of the difference
Bob Myers
Posts: 274
Joined: Sat Apr 24, 2004 6:33 am
Location: Paris,Ky
Contact:

Post by Bob Myers »

302, eh? Hope those tires are cheap, you'll be roasting the rears off of there! As far a weighting the front down, that'll do it.
88 BII,4.0, 9"& D44/4.88 locked. 1350/1354 doubles
92 XJ-wifes toy
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Post by Ranger Dave »

from the bottom of the frame where the bumpa bolts on in front is 27 1/2 the rear is 26 1/2. Just looks like more. Here it is when i had 31's on it. I kinda like it a little higher in front

Image
desrt_rat
Posts: 85
Joined: Fri Apr 14, 2006 9:03 pm
Location: Coos Bay Oregon
Contact:

Post by desrt_rat »

1 BII towing another one, thats the way to keep a parts rig where you need it,,,,, with ya.
Post Reply