Bellhousing Bolts

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
malcolm
Posts: 1
Joined: Sun Oct 09, 2005 2:03 pm

Bellhousing Bolts

Post by malcolm »

After lending my 85 Bronco II to my brother, it returned with some very nasty noises from the transmission.

Turns out that a few of the bolts are loose, and some are missing.

I don't want to pull any more of the bolts out to measure the existing ones; I have a new (used) transmission on the bench to replace what must be the wrecked one I have now - but I'm still missing the bolts.

Can anyone tell me the size for the bellhousing-to-engine and dust-plate-to-bellhousing bolts?

Thanks,
-Malcolm
Post Reply