89 Bronco 2 XLT 2.9 L Wiper Linkage Removal

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
Nitephall
Posts: 1
Joined: Wed Oct 21, 2020 5:14 pm
Location: UT

89 Bronco 2 XLT 2.9 L Wiper Linkage Removal

Post by Nitephall »

Hello everyone. First time Bronco owner, first time poster. Just came into posession of an 89 Bronco 2 XLT and the bushings in the wiper linkage are toast. I've seen how I can remove the motor mounting plate and the small panel on the driver's side that gives access to the wiper linkage on that side, but I don't see how removing these things will allow me to remove the entire wiper linkage transmission. The metal covering beneath the windshield (the cowl?) is not removable. I'm stuck here. Can anyone give me an idea of what I'm doing here? Because I certainly don't know.
Post Reply