2wd to 4wd conversion '89 Bronco ii

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
digdugtug
Posts: 1
Joined: Sat May 28, 2016 6:45 pm
Location: Gardendale, AL

2wd to 4wd conversion '89 Bronco ii

Post by digdugtug »

Bronco ii '89 2wd automatic with A4LD
Swapped front axle with '92 explorer 4wd - no issues here
4WD harness and shift control module out of a '91 Explorer

Bronco ii harness has different wires and pin locations than '91 explorer 4wd harness

I've trimmed the connector so they will mate together but need a wiring diagram and/or pin out to swap wires with one of the plugs

Any help would be appreciated.
Post Reply