Spring Problems! Please help

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
Lifted_B2
Posts: 2
Joined: Thu Aug 21, 2014 5:29 pm
Location: Washington

Spring Problems! Please help

Post by Lifted_B2 »

i just lifted my B2 four inches, and now that it is done, the front wheels sit like this \-o-/ they are five degrees out. the springs look as if they want to pop out and they do not seat very well, so i believe they are to long and stiff. can someone with a four inch lift please measure their springs (under load is ok) and possibly post a pic so i can see how they fit. thank you.
User avatar
Mud Addict
Posts: 202
Joined: Mon Dec 27, 2010 9:36 pm
Location: Enumclaw, WA

Re: Spring Problems! Please help

Post by Mud Addict »

Does your lift brackets have two sets of holes? If so try moving to lower hole. Where you at in Washington?
User avatar
2813josh
Posts: 5
Joined: Thu Nov 06, 2014 6:39 pm
Location: Mascotte, Florida
Contact:

Re: Spring Problems! Please help

Post by 2813josh »

Did the kit you used come with drop brackets for the axle? Anything over 2 inches of lift they are a must. Also,you'll need camber bushings.
I have 5" on mine with 3 deg camber bushings,if I remember correctly.
User avatar
2813josh
Posts: 5
Joined: Thu Nov 06, 2014 6:39 pm
Location: Mascotte, Florida
Contact:

Re: Spring Problems! Please help

Post by 2813josh »

ImageImage
User avatar
2813josh
Posts: 5
Joined: Thu Nov 06, 2014 6:39 pm
Location: Mascotte, Florida
Contact:

Re: Spring Problems! Please help

Post by 2813josh »

Only pics I have at the moment. First one shows the bracket you need. There are actually 2.
The second is the camber bushing..the big castle but deal in front of the spring.
Post Reply