Clutch bleed

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
valm35
Posts: 3
Joined: Sun Feb 16, 2014 9:25 pm

Clutch bleed

Post by valm35 »

Hey everyone I have a 84 bronco2 I recently replaced the flywheel on but now I can't seem to find the bleeder valve for my clutch slave cylinder I have looked in the only places I think it could be (slave cylinder,an master)
Using Tapatalk
dgl6y6
Posts: 84
Joined: Wed Jul 22, 2009 8:56 am
Location: St. Louis

Re: Clutch bleed

Post by dgl6y6 »

valm35 wrote:Hey everyone I have a 84 bronco2 I recently replaced the flywheel on but now I can't seem to find the bleeder valve for my clutch slave cylinder I have looked in the only places I think it could be (slave cylinder,an master)
If its the FM146 transmission, the bleeder screw is on the slave right above the hose connection. I may be wrong but the bleeder should be on the slave on most every setup.
valm35
Posts: 3
Joined: Sun Feb 16, 2014 9:25 pm

Re: Clutch bleed

Post by valm35 »

Image this is what my slave cylinder looks like
Using Tapatalk
kirkland2887
Posts: 86
Joined: Sun Jan 29, 2012 6:00 pm
Location: Albion, Idaho

Re: Clutch bleed

Post by kirkland2887 »

Is there a little allen screw on the end
valm35
Posts: 3
Joined: Sun Feb 16, 2014 9:25 pm

Re: Clutch bleed

Post by valm35 »

as far as I can see there wasn't one
Using Tapatalk
Post Reply