2.9 to 5.0

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
Jbots
Posts: 22
Joined: Sat Jun 23, 2012 8:44 pm
Location: Graham, Washington

2.9 to 5.0

Post by Jbots »

Hey guys had a few questions on this swap i wanna do, will the 2.9 tranny bolt up to the 5.0? Any other input would be appreciated thanks
kirkland2887
Posts: 86
Joined: Sun Jan 29, 2012 6:00 pm
Location: Albion, Idaho

Re: 2.9 to 5.0

Post by kirkland2887 »

No. do a search for swaps. there are lots of posts. therangerstation.com has some good info. but nobody ever talks about fuel system set up when they put in a fi 5.0. that is the info i need
RAZOR
Posts: 42
Joined: Mon Apr 16, 2012 10:00 pm
Location: Marshall, NC, 28753

Re: 2.9 to 5.0

Post by RAZOR »

kirkland2887 wrote:No. do a search for swaps. there are lots of posts. therangerstation.com has some good info. but nobody ever talks about fuel system set up when they put in a fi 5.0. that is the info i need
don't hold me to this but I've been told that if you swap in a carbureted 5.0 that all you have to put in the original fuel system is a new fuel pump and take out the current one in your tank
kirkland2887
Posts: 86
Joined: Sun Jan 29, 2012 6:00 pm
Location: Albion, Idaho

Re: 2.9 to 5.0

Post by kirkland2887 »

what if you want fuel injection. i read somewhere that the stock pump in the b2 will support a 5.0 but don't know how true it is
User avatar
tekatlarge
Posts: 992
Joined: Tue Jan 17, 2006 8:54 am
Location: Coastal, Worshington

Re: 2.9 to 5.0

Post by tekatlarge »

It's True
The Tek @ Large
Coastal,Worshington
Livin life on the dole on the Coast
Post Reply