lift issue

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
4d4life
Posts: 21
Joined: Sun Dec 18, 2011 3:46 pm
Location: Nashville

lift issue

Post by 4d4life » Fri Jul 06, 2012 6:34 pm

Just lifted my 88 bronco ii and now I have a possative camberthe alignment shop won't touch it until the camber is fixed. Help would be great :) I will post pics if needed.

Jbots
Posts: 22
Joined: Sat Jun 23, 2012 8:44 pm
Location: Graham, Washington

Re: lift issue

Post by Jbots » Sun Jul 08, 2012 12:04 am

You need to get some drop brackets for the ttb system in the front, that and extended camber bushings

tedjames11
Posts: 26
Joined: Wed Jan 25, 2012 9:05 am
Location: salem connecticut

Re: lift issue

Post by tedjames11 » Sun Mar 24, 2013 8:31 am

If you can find were to buy just the drop brackets could you send me a link to were you found them? I cant locate just the brackets anywere. I would LOVE to just make them so id be cheaper but I cant find them for sale let alone the schematics. :rolleyes:

Mudhog1977
Posts: 206
Joined: Wed Apr 13, 2011 4:16 pm
Location: Warren,tx

Re: lift issue

Post by Mudhog1977 » Tue Mar 26, 2013 11:42 am

Try James duff enterprises
Live to ride, ride to live, thats how I roll

iceman21
Posts: 25
Joined: Fri Nov 02, 2012 10:02 pm
Location: Brewster, WA

Re: lift issue

Post by iceman21 » Thu May 23, 2013 12:18 am

Make your own. They Arnt that hard to make.

tedjames11
Posts: 26
Joined: Wed Jan 25, 2012 9:05 am
Location: salem connecticut

Re: lift issue

Post by tedjames11 » Tue Jul 09, 2013 10:52 am

did you have any luck at finding the schematics?

Lifted_B2
Posts: 2
Joined: Thu Aug 21, 2014 5:29 pm
Location: Washington

Re: lift issue

Post by Lifted_B2 » Thu Aug 21, 2014 6:07 pm

i also lifted my 84' drop brackets and everything. i still have very bad positive camber issues. can anyone help, it might be to stiff of springs but im unsure

User avatar
2813josh
Posts: 5
Joined: Thu Nov 06, 2014 6:39 pm
Location: Mascotte, Florida
Contact:

Re: lift issue

Post by 2813josh » Thu Nov 06, 2014 6:41 pm

You'll need to get camber bushings. Have to press out the ball joints to install.
Rock Auto sells them in varying degrees of adjustment.

Post Reply