trouble shooting

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
drofman
Posts: 487
Joined: Sun Dec 27, 2009 9:36 am
Location: san dirgo

Re: trouble shooting

Post by drofman »

Really, I thought it was the TFI. Was it corroded at the connectors?
drofman
Posts: 487
Joined: Sun Dec 27, 2009 9:36 am
Location: san dirgo

Re: trouble shooting

Post by drofman »

Funny, the pumps won't work if the swt. is no good and you said the pumps work
Jbots
Posts: 22
Joined: Sat Jun 23, 2012 8:44 pm
Location: Graham, Washington

Re: trouble shooting

Post by Jbots »

It only shuts the pumps off. When u reset the swtich it allows them to work again. Im just going to bypass the switch all together
drofman
Posts: 487
Joined: Sun Dec 27, 2009 9:36 am
Location: san dirgo

Re: trouble shooting

Post by drofman »

It’s there for a reason. If you get into an accident and rupture a fuel line you won’t add fuel to the fire. There’s not much on the inside, just a magnetic ball on a stem. The connection do get corroded though. How did you pin point it to the swt.?
Post Reply