Ignition Problem

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
white 84
Posts: 3
Joined: Sun Mar 27, 2011 8:30 am
Location: centralia wa

Ignition Problem

Post by white 84 »

I have a 84 BroncoII with 2.8 auto. It was doing great until it just died at a stop light and wouldn't start. I have fuel. Does anyone have any ideas of what to check with the electrical. It turns over great.
Top
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:
Contact Ranger Dave

Re: Ignition Problem

Post by Ranger Dave »

ya got spark?
Top
white 84
Posts: 3
Joined: Sun Mar 27, 2011 8:30 am
Location: centralia wa

Re: Ignition Problem

Post by white 84 »

No Spark
Top
wmmichael20
Posts: 20
Joined: Sat Jul 31, 2010 7:47 am
Location: edmore michigan

Re: Ignition Problem

Post by wmmichael20 »

check the coil brother I have had the coil wire burn in half before on both my ranger and bronco ( kinda my fault on the ranger didnt put it back in the loom and it touched the exhaust manifold lol
Top
white 84
Posts: 3
Joined: Sun Mar 27, 2011 8:30 am
Location: centralia wa

Re: Ignition Problem

Post by white 84 »

It was my ignition module located on the distributor. Took the one off my spare engine and it fired right up.
Top
Post Reply

Return to “Bronco Tech”