lift kit tech

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
label_sk8er16
Posts: 5
Joined: Tue Nov 30, 2010 4:56 pm
Location: nebraska

lift kit tech

Post by label_sk8er16 »

my new 88 b2 is my new project, i have wheels and tires on lock but the next step is to lift it and have a nice base to start my project out on. my thoughts were a 4 inch suspension lift and a two or three inch body lift. I'm planing on going with 31x10.50x15 wheels and tires. is there anything special i should know before lifting it? do i need longer brake lines/drive shaft, special tools, etc... any advise would be appreciated, thanks!

-Ben-
User avatar
Mud Addict
Posts: 202
Joined: Mon Dec 27, 2010 9:36 pm
Location: Enumclaw, WA

Re: lift kit tech

Post by Mud Addict »

2in of lift is plenty for 31's :redneck:
justinC
Posts: 19
Joined: Wed Feb 16, 2011 1:55 pm
Location: sheridan wy

Re: lift kit tech

Post by justinC »

my 88 has a 3" body lift and 31's rub a little if i turn the wheel to the stops
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: lift kit tech

Post by Ranger Dave »

justinC wrote:my 88 has a 3" body lift and 31's rub a little if i turn the wheel to the stops

rubs on what??
justinC
Posts: 19
Joined: Wed Feb 16, 2011 1:55 pm
Location: sheridan wy

Re: lift kit tech

Post by justinC »

not sure i havent had much of a chance to look at it. i only got to drive it for a day and the flex plate broke so it has been in the shop almost a month. i only noticed a couple of times.
Post Reply