Wireing harness question?

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
Warlock489
Posts: 6
Joined: Sun Aug 08, 2004 1:14 pm
Location: Omaha, NE
Contact:

Wireing harness question?

Post by Warlock489 »

I'm trying to findout what these wires go to: (86 BII, 2.9)

Image

Image

Image

I took the main harness out of the truck and split the tape to see where all the wire go.
_______
l 4 l 5 l 6 l
l 1 l 2 l 3 l

#1 Empty
#2 Yellow/Red -> Oil pan Sensor -> #23 on the computer harness
#3 Black/White -> Fuseable Link 20 GA (Starter Solanoid) -> Yellow Fuseable link (Starter Silanoid) -> Green Silonoid on passenger side fender
#4 Plain Green -> #2 on Computer Harness
#5 Black/White -> Big Glob of black/white wires --> (1 goes to a vacume box on the pass side fender w/Big Black vacume hose) (2 go to the test terminals) (1 goes to #46 on the computer harness)
#6 White/Black --> (1 goes to the Transmission) (1 go to #30 on the Computer Harness)

What I need to know is what is the Green silonoid that is connected to the #3 wire?

Are the black/white wires of #5 grounds?
Post Reply