2" lift questions...

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
1986B2
Posts: 24
Joined: Mon Dec 20, 2010 6:59 pm
Location: Texas

2" lift questions...

Post by 1986B2 »

On my 86 b2 4x4 could i put 2" rear lift blocks and 2" coil spacers on the front without getting swaybar and radius arm drop brackets?? also what size tire could i clear with that? I have a set of 15x10 wheels for it.
Grizzley86
Posts: 2
Joined: Thu Jan 06, 2011 10:11 pm
Location: Minnesota

Re: 2" lift questions...

Post by Grizzley86 »

You could clear 31 x 15 x 10.5 that what i have on my 85 . But they do make a cheap 3 inch lift for about 300 comes with all the drop brackets
1986B2
Posts: 24
Joined: Mon Dec 20, 2010 6:59 pm
Location: Texas

Re: 2" lift questions...

Post by 1986B2 »

so you have 2"s of lift with 31's?
broncofan
Posts: 75
Joined: Tue Aug 18, 2009 1:12 pm
Location: FT. Hood, TX.

Re: 2" lift questions...

Post by broncofan »

I put 31's on my 84 BII still needed a 3 inch body lift to clear so front wouldnt rub when turning
2013 Taurus SHO LMS V11 tune, 06 F150 Harley-Davidson Edition,03 Mustang GT Conv, 97 Jeep GC Laredo 5.2, 84 BII
User avatar
Ranger Dave
Posts: 1432
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: 2" lift questions...

Post by Ranger Dave »

broncofan wrote:I put 31's on my 84 BII still needed a 3 inch body lift to clear so front wouldnt rub when turning
then you have some really weak springs
broncofan
Posts: 75
Joined: Tue Aug 18, 2009 1:12 pm
Location: FT. Hood, TX.

Re: 2" lift questions...

Post by broncofan »

Thanks dave, really never thought about that. Now i need to look for some springs. LOL
2013 Taurus SHO LMS V11 tune, 06 F150 Harley-Davidson Edition,03 Mustang GT Conv, 97 Jeep GC Laredo 5.2, 84 BII
Mr G
Posts: 5
Joined: Sat Jan 22, 2011 3:26 am
Location: Nor Cal

Re: 2" lift questions...

Post by Mr G »

I was following this thread and want to know what springs are commonly used? I have a set of 31's and 33's but do not know what is used for lifting.

Thanks
User avatar
Ranger Dave
Posts: 1432
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: 2" lift questions...

Post by Ranger Dave »

you can get a couple inches using xplorer springs
Post Reply