1984 2.8 water inlet

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
mark1
Posts: 1
Joined: Sat Dec 11, 2010 10:09 pm
Location: ohio

1984 2.8 water inlet

Post by mark1 »

my buddy has a 1984 bronco 2 with a 2.8 engine and he accidently broke the water intake......so far we are unable to locate this part and everybody just says good luck.we googled this part so please don't suggest that,,the part does come up (motorcraft rh 16 ) but is not available..please,, any help in finding one would be greatly appreciated...thanks... mark,,,,,
wmmichael20
Posts: 20
Joined: Sat Jul 31, 2010 7:47 am
Location: edmore michigan

Re: 1984 2.8 water inlet

Post by wmmichael20 »

start junk yard searching
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: 1984 2.8 water inlet

Post by Ranger Dave »

wmmichael20 wrote:start junk yard searching

he'll spend $21 on gas searchin JY's. a phone call, a CC number,to his door. done
tonymasone
Posts: 53
Joined: Thu Dec 31, 2009 6:44 am
Location: new castle, pa

Re: 1984 2.8 water inlet

Post by tonymasone »

Post Reply