Trouble with my 1990 2.9

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
mwilkey13
Posts: 2
Joined: Wed Apr 28, 2010 7:53 am
Location: ga

Trouble with my 1990 2.9

Post by mwilkey13 »

I cant seem to get my 1990 bronco II to start. I have replaced the distributor but I dont seem to be getting fire. I put a coil on it but still nothing. Any ideas?
Top
User avatar
Ranger Dave
Posts: 1433
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:
Contact Ranger Dave

Re: Trouble with my 1990 2.9

Post by Ranger Dave »

ya got 12v going to the coil?
Top
mwilkey13
Posts: 2
Joined: Wed Apr 28, 2010 7:53 am
Location: ga

Re: Trouble with my 1990 2.9

Post by mwilkey13 »

yeah
Top
KRE
Posts: 30
Joined: Sat Nov 15, 2008 5:09 am

Re: Trouble with my 1990 2.9

Post by KRE »

Test light to the - side of the coil while trying to start it. The light should pulse on an off. If it does not, could be Dist. not turning, computer issue, computer relay/wiring issue, TFI problem, rotor broken/missing, broken/unconnected coil wire. or wiring between the Dist an coil, or defective coil.
Top
Post Reply

Return to “Bronco Tech”