Need new carb.

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
User avatar
C_Sanchez_A
Posts: 48
Joined: Wed May 13, 2009 8:39 am
Location: Ontario, Canada

Need new carb.

Postby C_Sanchez_A » Fri Mar 12, 2010 4:30 pm

I was hopping the carb in my '84 B2 would last me the winter, but unfortunatly it hasn't. What would be the best replacment (stock or upgrade)?
1984 - Ford - Bronco II
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000

broncofan
Posts: 68
Joined: Tue Aug 18, 2009 1:12 pm
Location: FT. Hood, TX.

Re: Need new carb.

Postby broncofan » Sun Mar 14, 2010 6:49 am

if no motor or exhaust upgrade i'd stay stock. have you priced them ? 3 to 4 hundred easily, i'd rebuild.cost me 2 to have mine done some place in fla. took 1 week and lifetime gaurantee.
2013 Taurus SHO LMS V11 tune, 06 F150 Harley-Davidson Edition,03 Mustang GT Conv, 97 Jeep GC Laredo 5.2, 84 BII

User avatar
C_Sanchez_A
Posts: 48
Joined: Wed May 13, 2009 8:39 am
Location: Ontario, Canada

Re: Need new carb.

Postby C_Sanchez_A » Sun Mar 14, 2010 9:30 am

I plan on putting in a cat-back exhaust.
1984 - Ford - Bronco II
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000

User avatar
Ruffinit
Posts: 183
Joined: Thu Oct 04, 2007 4:50 pm
Location: Muscatine, Iowa

Re: Need new carb.

Postby Ruffinit » Mon Mar 22, 2010 9:54 am

Keep the stock carb. The 2150 is arguably the best 2 bbl made. Get it rebuilt or do it yourself. I'll sell you one that works extremely well for $1100 (rustless BII included) :eek:

User avatar
C_Sanchez_A
Posts: 48
Joined: Wed May 13, 2009 8:39 am
Location: Ontario, Canada

Re: Need new carb.

Postby C_Sanchez_A » Mon Mar 22, 2010 5:08 pm

If I had the money and you lived close by I would.
1984 - Ford - Bronco II
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000

User avatar
Ranger Dave
Posts: 1428
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: Need new carb.

Postby Ranger Dave » Tue Mar 23, 2010 1:09 am

http://rangerdave.freeforums.org

User avatar
C_Sanchez_A
Posts: 48
Joined: Wed May 13, 2009 8:39 am
Location: Ontario, Canada

Re: Need new carb.

Postby C_Sanchez_A » Wed Mar 24, 2010 5:31 pm

Thanks for the links Ranger Dave, I'll give it a try.

Just a quike question does any one know about how much it cost to get the motor rebuilt?
1984 - Ford - Bronco II
1995 - Hyundai - Accent (R.I.P.)
1994 - Mazda - B3000


Return to “Bronco Tech”

Who is online

Users browsing this forum: Google [Bot] and 1 guest