long time no talkie....

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
MXjunk127
Posts: 40
Joined: Wed Apr 21, 2004 5:10 pm
Location: Dallas, TX
Contact:
Contact MXjunk127

long time no talkie....

Post by MXjunk127 »

hey guys whats up...

I know none of you really care,lol, but my truck is almost back together, I just got new tires, 33X12.50X15 TSL Radials, and new series 97 Black 15x10 Rims....anyway, I have another newbie question...do i really have to get the$ 400 warn manual hub kit, or can i go the cheaper conversion kid? should I go with the warn? mine are nuked....

Also...My sterio has some sort of short in it and I think the previous owner spliced it into the wiring harness...is that something i should address immediately?
Skin and Bones Motorsports.com
88' 4x4 6" SL, 33" TSL Radials
Top
User avatar
Nobody
Posts: 2232
Joined: Sun Apr 18, 2004 6:38 pm
Location: Stanwood, WA.
Contact:
Contact Nobody

Post by Nobody »

I wouldn't spend a dime on aftermarket hubs. You can get oem spares for a dime a dozen. Carry a spare. What's wrong with yours? I never had a problem breaking hubs.

I would address any electrical problem immediately. That's how fires start. At the very least, pull the fuse.

And of course we care.....good choice on tires :cool:
Top
wilber
Posts: 189
Joined: Tue Apr 27, 2004 6:59 pm
Location: cleveland ohio

Post by wilber »

what axle do you have so we can tell you about the hubs
Top
MXjunk127
Posts: 40
Joined: Wed Apr 21, 2004 5:10 pm
Location: Dallas, TX
Contact:
Contact MXjunk127

Post by MXjunk127 »

the stock TTB. Dana 28? I have the auto locking ones.
Skin and Bones Motorsports.com
88' 4x4 6" SL, 33" TSL Radials
Top
My little pony
Posts: 26
Joined: Fri Jul 23, 2004 6:32 am
Location: Paradise ca.
Contact:
Contact My little pony

Post by My little pony »

Got my man hubs from e-bay and the spindle nuts from duff. all under $50
God forgives, Rocks Don't.
Top
FatMan
Posts: 762
Joined: Sun Apr 18, 2004 10:26 pm
Location: Mt.Vernon, WA
Contact:
Contact FatMan

Post by FatMan »

check the yard's b2's are plentiful out here im almost tempted to buy another. i have to many project's going already though :frown:
Darker than your average wheeler!!!!
Top
DZK007
Posts: 41
Joined: Tue Apr 27, 2004 9:03 pm
Location: Rio Rancho New Mexico, 87124

hubs?

Post by DZK007 »

I can sell you my manual hubs and hardware ready to install. I'm swapping in a D-35 and won't need them D-28 ones any more.

dzk007@go.com if you're interested, e-mail me
'84 Bronco II, 3.0L, 4X4, 5spd, D-35+8.8 w/31spl Explorer axles, some suspension mods.....

410fortune Owes ME $$$ !
Top
Post Reply

Return to “Bronco Tech”