STOCK RADIO

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
WAREAGLE
Posts: 20
Joined: Fri Mar 14, 2008 11:00 pm
Location: BAY MINETTE, AL

STOCK RADIO

Post by WAREAGLE »

:confused: I HAVE A '89 B2 TOOK THE FRONT DASH OFF AND CANT FIGURE OUT HOW TO GET THE MOTHER F-IN :flipoff: STOCK RADIO OUT OF THIS THANG ITS GOT FOUR HOLES ON THE FACE PLATE I DONT KNOW IF THAT GOT SOMETHING
TO DO WITH IT OR WHAT :wtf:
SGT. KYLE
DBrown
Posts: 1545
Joined: Mon Apr 19, 2004 5:21 am
Location: Bowling Green, KY

Post by DBrown »

I think you have to stick a paper clip in all four holes and pull the radio out...
71 Bronco - twin sticked, full width, 2" lift, wristed arm, lots of rust...

http://www.catalystcycles.com
yodaman1151
Posts: 74
Joined: Thu Jan 10, 2008 12:36 pm
Location: OC, Oregon

Post by yodaman1151 »

go to schucks or autozone and i remember seeing a tool that is shaped like a u bolt but made outta wire... probably easier to fab one yourself but at least go take a look, but ya i do believe it pokes in all 4 holes
wilber
Posts: 189
Joined: Tue Apr 27, 2004 6:59 pm
Location: cleveland ohio

Post by wilber »

yea, you have to press in all 4 holes at the same time to release the clips. they sell u shaped tools for this, or something like a metal coat hanger will work.
User avatar
Phillippi
Posts: 1193
Joined: Mon Apr 19, 2004 9:11 pm
Location: UTAH
Contact:

Post by Phillippi »

I used 4 nails and pulled it out. I then threw the radio in the garbage.
Post Reply