autohubs to lockouts

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
davedale
Posts: 12
Joined: Thu Jan 25, 2007 2:38 pm

autohubs to lockouts

Post by davedale »

my brother just bought an 88 b2 that has axels from an explorer in it and the question at hand is it has those automatic hubs and he hates them as much as i do so does anyone know what all is involved in converting to lockouts?
Top
EBSTEVE
Posts: 291
Joined: Mon Apr 26, 2004 8:10 am

Post by EBSTEVE »

PM jwillie, he just did the manual hubs on his Ranger front a few months ago.
Ranger 5.o, needing another project like Rosie O'Donnell needs another M&M.
Top
Happy_Jack
Posts: 160
Joined: Mon Apr 26, 2004 2:49 am
Location: Wichita, KS
Contact:
Contact Happy_Jack

Post by Happy_Jack »

This is the best write up I have on the 35 upgrade: http://www.broncoii.org/techpages/autom ... index.html

The 28 is slightly different in as it has a small bearing washer and another washer in addition to the splined washer on the end of the axle shaft.
Top
davedale
Posts: 12
Joined: Thu Jan 25, 2007 2:38 pm

Post by davedale »

thanks guys :D
Top
Post Reply

Return to “Bronco Tech”