V8 swap

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
curiousyoungster
Posts: 3
Joined: Tue Jan 30, 2007 1:00 pm

Post by curiousyoungster »

Cool thanks
what kind of lift kit would i need to clear the 39.5's??????????

what are a set of them worth
Dreg
Posts: 21
Joined: Wed Dec 06, 2006 6:14 pm

Post by Dreg »

Any good writeups on a 302 swap?
Paul
Posts: 231
Joined: Tue May 01, 2007 4:57 am
Location: Marysville, Indiana
Contact:

Post by Paul »

guys i dont mean to correct anyone by any means but he said it was a 1990 BII and i know the 1990 BII came stock with the DANA 35 not the 28 they changed it over in 89 and was supposed to be in all BII built after April 1989 before April they used the D28 as i know most of you know, but i think it was mentioned doing the 35 upgrade, he shouldnt need to do a D35 upgrade since it was stock on his 1990 model, and if he wants to check it for sure the D35 has 10 bolts on the front Diff cover and the D28 has 12 bolts on the front diff cover by my understanding..... saometimes better to check than presume, but if he bought it in 90 then i would assume noone has changed it before and it should be the D35 under the truck according to all the manuals and literature, and part stores...
1989 Bronco II 4x4
Mitsubishi 146 5 speed,
Stock D35
235/75/15
4.0L upgrade
NO LIFT
Crop Top
Post Reply