np435 hydro clutch

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
wilber
Posts: 189
Joined: Tue Apr 27, 2004 6:59 pm
Location: cleveland ohio

np435 hydro clutch

Post by wilber »

finaly got it in and the slave on, i belive its all from a 79, ill have to check with alx to make sure.
Attachments
whiteb2 009.jpg
whiteb2 009.jpg (97.25 KiB) Viewed 1720 times
whiteb2 008.jpg
whiteb2 008.jpg (85.58 KiB) Viewed 1718 times
DBrown
Posts: 1545
Joined: Mon Apr 19, 2004 5:21 am
Location: Bowling Green, KY

Post by DBrown »

the tranny is probably, or possibly from a 79. but the hydro is not. they are cable. I would like to know what bracket and parts he used to make that work if you can get them........
71 Bronco - twin sticked, full width, 2" lift, wristed arm, lots of rust...

http://www.catalystcycles.com
User avatar
Nobody
Posts: 2232
Joined: Sun Apr 18, 2004 6:38 pm
Location: Stanwood, WA.
Contact:

Post by Nobody »

That should be the aluminum bellhousing from the 80's.

You could have at leasted cleaned it first :finger:
wilber
Posts: 189
Joined: Tue Apr 27, 2004 6:59 pm
Location: cleveland ohio

Post by wilber »

yea, alx said the same thing, just trying to get it together for chubfest in july
Post Reply