BroncoII4x4.com

With no lift i'm currently running Super Swamper TSL/SX 29X10.5 on 15" rims. There is some front fender rub, but i'v eonly noticed it when taking corners slowly. http://www.4wheelparts.com/PDT65085.aspx thats same size as the 235/75/15 i think may only be 1/4 to 1/2 inch difference depending o...

on a manual trans there is no trans dipstick and fluid level isent nearly as important but if you have a leak you will need to check and fill it and heres how to do this crawl under your truck making sure tires are chocked and you will find a small check plug about midway up on side of trans will pr...

biggest tires no lift and uncut fenders is 235/75/15 biggest tires with cutting 2# out of front fender is 31x10.5/15 this is what i am running and am very happy with the way they look and drive

take out starter and turn engine by hand and inspect the flywheel

sounds like a ground problem to me or a funky battery

like you said start with a good tune up and what your describing sounds to me like you might have a mass air flow problem like its not sending the right amount of info on air passage to the computer or you might have some injectors that are wanting to dump fuel one thing to look at is see if your ch...

i know several people that runt he mastercraft m/t and i sell them where i work and i think they are a great tire for the price and they preform well off road these will defiantly be the tires i go with when its time for new ones on my truck

rtv black silicone dont work?

i took off 1" today to clear my slightly used and major rubbing 31's i plan on taking off another inch or 2 just to make it look a little better. im wanting to get a set of fender flare things to smooth it out can i just make these at home with fiber glass or would it be in my best interest to ...

checked your clutch master and slave cyliner or fluid in the clutch system

thanks

i discovered today i have a bad alternator only charging little bit and i need to know if mine has a external voltage regulator or an internal so i can buy the rebuild kit for one this is an 84 bronco II with a 2.8

ive got the center one looks awesome really makes the truck look mean and its great to keep stuff from damaging the grille ive run over trees and all sorts of stuff and it just rolls on over and make a good spot for fog light mounts dont have any pics but will get one as soon as it quits rainin

you have an electrical short somewhere hopefully something simple but nothing off the top of my head comes to mind

to find intake and exhuast valve remove spark plug in #1 and get it to tdc (top dead center) of the compression stroke (both valves are closed) then the next stroke the exhuast valve will open so you kno its exhuast and others intake

hope that make since