Search found 1458 matches
- Thu Feb 05, 2009 11:29 am
- Forum: Bronco Tech
- Topic: 5.0 Install
- Replies: 334
- Views: 36591
Re: 5.0 Install
I am almost 100% sure of the switch on the top cover only being for the backup lights. on my old BII the only one I found was the clutch peddle switch. I even bypassed it one time because it broke and it would start in gear. also where is the VSS for the 2.9? there was a weird sensor on my old speed...
- Wed Feb 04, 2009 11:06 am
- Forum: Bronco Tech
- Topic: 5.0 Install
- Replies: 334
- Views: 36591
Re: 5.0 Install
is the plug on the top cover? that is the only place I have ever seen a sensor on an NP435 and it is for the backup lights.
I believe the neutral safty switch is in the peddle assembly under the dash.
I believe the neutral safty switch is in the peddle assembly under the dash.
- Fri Jan 30, 2009 11:31 am
- Forum: Bronco Tech
- Topic: clutches
- Replies: 5
- Views: 1180
Re: clutches
I can't remeber all the details but I would look into going with a 4.0L flywheel/clutch. I think I remeber seeing info on it at the rangerstation.com a long time ago when I was doing my motor swap...
- Sat Jan 24, 2009 3:58 pm
- Forum: Bronco Tech
- Topic: My rear drive shaft
- Replies: 14
- Views: 2868
Re: My rear drive shaft
honestly I dont know, but measure what you got before you go and ask at the counter. around here they have a system that tells them about interchange.
good luck!
good luck!
- Sat Jan 24, 2009 3:56 pm
- Forum: Bronco Tech
- Topic: 5.0 Install
- Replies: 334
- Views: 36591
Re: 5.0 Install
honestly I would install what you got then measure and see what you can run. I seem to remember some of the intakes being kind of tall. I think the mustang intakes are the lowest profile. I would like for someone back me up on this, but if I remember correctly on the belt system look at where the co...
- Sat Jan 24, 2009 10:35 am
- Forum: Bronco Tech
- Topic: My rear drive shaft
- Replies: 14
- Views: 2868
Re: My rear drive shaft
if you plan to keep your truck for any amount of time I would not replace it with that same style shaft.
I went threw 2 of them before I got one from James Duff. Duff has a website but they are expencive. you might find a better deal at bronco graveyard
I went threw 2 of them before I got one from James Duff. Duff has a website but they are expencive. you might find a better deal at bronco graveyard
- Sat Jan 24, 2009 10:33 am
- Forum: Bronco Tech
- Topic: Trouble with injectors
- Replies: 2
- Views: 751
Re: Trouble with injectors
I would pull it back out and check the o-ring you might have cliped it going in and that might cause it to leak.
also be carefull when pulling them out they can break pretty easy
also be carefull when pulling them out they can break pretty easy
- Sat Jan 24, 2009 10:30 am
- Forum: Bronco Tech
- Topic: 1986 2.9 stuck on a repair and need help please.
- Replies: 8
- Views: 1526
Re: 1986 2.9 stuck on a repair and need help please.
if what you are trying doesn't work I would borrow a fuel pressure guage and check what you have on the rail
- Fri Jan 23, 2009 3:41 pm
- Forum: Bronco Tech
- Topic: Frame question...
- Replies: 0
- Views: 588
Frame question...
some of you know I have been working on a 76 4x4 Frame for my old tow rig. well, I was wanting some opinions on a frame decision I am trying to make on the rear. I am wanting to pull the rear forward arount ~22" but my problem is the frame looks like this: I I / \ I I I am thinking of cutting t...
- Fri Jan 23, 2009 2:32 pm
- Forum: Bronco Tech
- Topic: Willys Pickup and the death of the bronco II
- Replies: 45
- Views: 8820
Re: Willys Pickup and the death of the bronco II
very cool...
- Wed Nov 26, 2008 8:12 am
- Forum: Bronco Tech
- Topic: 4.0 motors
- Replies: 3
- Views: 959
Re: 4.0 motors
I can kindof agree with that but not completely...
I did that exact thing, reomve one and install the other then make the connections at the fire wall on the driver side but it does take some time. it took me three tries to get it right.
I did that exact thing, reomve one and install the other then make the connections at the fire wall on the driver side but it does take some time. it took me three tries to get it right.
- Sat Nov 22, 2008 10:15 am
- Forum: Bronco Tech
- Topic: 4.0 motors
- Replies: 3
- Views: 959
Re: 4.0 motors
you can't carb a 4.0L there is no distributor
I would go 302, better base and tons of aftermarket...
I would go 302, better base and tons of aftermarket...
- Sat Nov 22, 2008 10:11 am
- Forum: Bronco Tech
- Topic: What is this??
- Replies: 5
- Views: 1128
Re: What is this??
x2My guess is the backup lights switch.
- Sat Nov 22, 2008 10:06 am
- Forum: Chit Chat
- Topic: These people want to hear from you
- Replies: 4
- Views: 1371
Re: These people want to hear from you
no they don't...
from the quick scan I got from that site, those are the same people who want to stop us from using public land for trail riding.
from the quick scan I got from that site, those are the same people who want to stop us from using public land for trail riding.
- Sat Nov 22, 2008 9:55 am
- Forum: Chit Chat
- Topic: PSA: Go Vote!
- Replies: 3
- Views: 1197
Re: PSA: Go Vote!
I know I vote for the opposite team then y'all, but mine didn't realy count either. I don't realy like the way we elect a president...