BroncoII4x4.com

the tranny probably went out and that was the one they found in the junk yard...

might be a clogged cat. and I don't think the code reader will help you with that.

are you able to unbolt your cat. from your exhaust or is it all welded together?

well after thinking about it I think I came up with 2 different options. I am basicly using 4 front hangers for a 4x4 f100 meaning the 3" wide leafs and the lower hanging front brackets from 2 different trucks. 1. I am thinking to fab a bracket to over lap the frame and mount the front hanger t...

when you give it some gas does it get better or worse?

ok, this is not a BII specific question but I feel like this could help some people when setting up there leafs in the rear. I am relocating the leafs on my latest project and where I want them the frame is not completely parallel. as in the frame looks like this "/ \" instead of this &quo...

a code reader was around $40 when I bought mine.

you might try to just unplug, I don't know...the o2 sensor to send it into a "limp home" mode and see if it will drive smooth enough to get it to autozone...

pull codes...

on the shackle I wouldn't go much more then an inch or so...reason is you have to extend the shackle 2" to get 1" of lift. some people use a chevy drop shackle to lift a BII. might want to look into that. I would probably measure everything, do your front first then match the back to the f...

I don't know about the chevy leafs but I would not build a shackle to get too much lift.

personaly I would put together a combo pack from different leaf packs or just buy the 7" lift leaf if anyone sells that height of lift.

what are you doing for the front?

that thing is realy looking good!

so when can we expect the first wheeling pic's?

well, the good thing is if you get the whole truck is you are getting more then just everything under the hood if it is 4x4. you will also score a D35.

I would definatly recomend having both trucks setting next to each other when you do the swap. how good of shape is the explorer in?

thats kind of open ended...

what exactly are you talking about just motor? or getting a whole new truck?

and the np435 I just got done repainting. I am going to pull it apart and check everything and throw some new gaskets on it since I found the broken bearing retainer...

here is a pic of the 79 D44 I am reworking

well, I haven't exactly been working on bronco stuff but it is moving me in a direction. so here are some pic's of what I have been working on! twin sticked the 205, fabbed my shifters and everything cost me $0 as you can see I used the factory shifter for the 205 and a d21 shifter. I cut down the p...