Paul wrote:yeah i had the same issuer on the 2.9 and then on teh 4.0 also. so i drilled them and sued nut bolt and jam nut..
Search found 226 matches
- Wed Apr 29, 2009 12:44 pm
- Forum: Bronco Tech
- Topic: Bolts breaking
- Replies: 3
- Views: 862
Re: Bolts breaking
- Wed Apr 29, 2009 12:43 pm
- Forum: Bronco Tech
- Topic: Bolts breaking
- Replies: 3
- Views: 862
Re: Bolts breaking
yeah i had the same issuer on the 2.9 and then on teh 4.0 also. so i drilled them and sued nut bolt and jam nut..
- Wed Apr 29, 2009 12:27 pm
- Forum: Bronco Tech
- Topic: 2.9 is running rich
- Replies: 7
- Views: 2348
Re: 2.9 is running rich
not necessarily, my bronco II has never had a light come on unless it was HOT or low on oil......... of course i think about ahlf my dash gave out long ago...........LOL.......... MAP sensor can absolutelt casue it, and check the IAC, it should alter after it warms up, (CLOSE) to reduce the amount o...
- Wed Apr 29, 2009 12:10 pm
- Forum: Bronco Tech
- Topic: Noob Here
- Replies: 1
- Views: 589
Re: Noob Here
if you want more HP do the 4.0 upgrade, and change out the front and rear d28 axles for the d35 axles, but remember check the month it was produced to find out which one you have since it is an 89 model, they started suing the d35 in 89 late models, want to know which it is can also count the number...
- Wed Apr 29, 2009 12:04 pm
- Forum: Bronco Tech
- Topic: bought a 89 bronco 2
- Replies: 3
- Views: 899
Re: bought a 89 bronco 2
been a while since i have been on the site. my BII is out in the driveway, has 4.0 in it, 4x4 still works, crop top, and needs a new flywheel and clutch, so been thinking that it might be time to go automatic.............. stiil stock height and runing 235 /15 AT tires. I was reading that the 4x4 on...
- Sun Oct 21, 2007 4:17 pm
- Forum: Tools and Fabrication
- Topic: Product Review: Aeroquip
- Replies: 4
- Views: 3595
- Sun Oct 21, 2007 4:13 pm
- Forum: Bronco Tech
- Topic: Bucking Bronco
- Replies: 0
- Views: 1096
Bucking Bronco
Well I know most of you have heard of the Dreaded Bucking Bronco, due to clutch problems, well i found that the GKN style drive shaft in the rear being changed for a new spicer Universal joint drive shaft, and replacing front U joints throughout the front end, does wonders to take the buck out of th...
- Sun Oct 21, 2007 4:04 pm
- Forum: Bronco Tech
- Topic: engine hard to start, and when it starts, idle fluxciates fo
- Replies: 14
- Views: 3680
guys ....... he said it runs fine when the motor is warm, so it is hard to believe it is the fuel regulator......... i would recommend that he pulls the IAC off the truck and take it apart and oil the O-Ring inside ..... when the Oring dries it will bind it usually coated with a vacuum greese .........
- Sun Oct 21, 2007 3:52 pm
- Forum: Bronco Tech
- Topic: Different wheels/rims
- Replies: 2
- Views: 1244
1990 bronco II rims
:wtf: ....all you need to do is find a set of rims to fit an explorer, its got the d35 stock under the 1990 model BII so its the same exact rims for the explorer to fit, but in actuallity the rims for an earlier model bronco II off an d28 will fit also. bt the explorer will be easier to find in junk...
- Mon Oct 15, 2007 4:11 pm
- Forum: Bronco Tech
- Topic: A couple 4.0 swap questions
- Replies: 7
- Views: 2329
i changed mine out of an 1991 explorer and put it into an 89 BII everything bolted right in beautifully right down to using the motor mounts off the 2.9 on the drivers side instead of using the busted one that was on the 4.0. it all boplted in on mine and i used my y pipe off the 89, but i hear the ...
- Sun Oct 14, 2007 5:11 pm
- Forum: Bronco Tech
- Topic: engine hard to start, and when it starts, idle fluxciates fo
- Replies: 14
- Views: 3680
- Sun Oct 14, 2007 4:57 pm
- Forum: Bronco Tech
- Topic: 88 B2 no spark no fuel no starting
- Replies: 15
- Views: 3523
i replaced one on my 2.9 litre when it was in my BII the coil that is and it ran me $16.00 at the local parts store.... but when i had problems with mine i found a simple toggle switch jumping past my ignition relay was the only fix for the broken wire in my harness, and its still wired that way wit...
- Fri Aug 10, 2007 8:37 pm
- Forum: Bronco Tech
- Topic: 6" lift dillema, for 28 or 35, will it fit either
- Replies: 3
- Views: 1366
- Fri Aug 10, 2007 8:28 pm
- Forum: Bronco Tech
- Topic: cleaned my IAC, now barely runs!!
- Replies: 6
- Views: 1871
o Rings
o rings are used as seals in hydraulics and phnuematics always oil an o ring on assemblhy for future uses just like the o ring seal on an oil filter, but i am glad to hear it fixed your problem......
- Wed Aug 08, 2007 7:58 pm
- Forum: Bronco Tech
- Topic: plan to fix my bronco II
- Replies: 11
- Views: 3024
uhm i kinda had the same problem he had but all i did was run a hot wire from the bateery through a toggle switch and then to the distributor to the 2.9 when i had it in................. worked beautifull..............LOL and attached it so it backfed the wire to the pc when on, it advanced just fin...