BroncoII4x4.com

IF you live near arlington washington and want a Dana 44 there is one at the new arlington pull-a-part still in a 1979 ford f-150. The guy at the counter said that with the radius arms tie-rods, track bar and steering gear box it would be around $225.

It's time to replace my winch cable and I was thinking of using synthetic line. Does anyone have any experience with synthetic's or know were I can find some info on them? Also a good place to buy it. Thank you

EBSteve and I installed one in my D35. The hardest part was dissasembling they entire front end to do so. I have only used it in the snow but so far have been very satisfied.

I hope this works, I received this in an email this morning at work and I wanted to share it with everyone. Hopefully this works I really don't know what I'm doing. Check this out its really cool. http://mail.google.com/mail/?ui=2&ik=b8dc419565&attid=0.1&disp=vah&view=att&th=1183...

Last winter I swapped in a Dana 35 and an 8.8 from a 91 ranger and everything bolted right in. The only change I had make was to have the front drive line shorted. I used the stock springs from the ranger in the front and left the b2 springs in the rear and there was no lift, but the new running gea...

I took the swaybars off of my b2 a couple of years ago. The first time I drove it after that was a little scary, but know I don't even notice it. My bronco has a couple inches of lift. For a SAS an early bronco or late 70's ford are the prefered donor rigs. I've seen a couple of full width 78 bronco...

MARYSVILLE WASHINGTON

I was in Idaho 2 weeks ago and found a complete stage 2 kit, used for $500, it has the extended radius arms and I'm not sure where to mount them. The new arms are about 15" longer then the stock ones. Oh ya and I ve been working 65 hours a week down town seattle, you know what that commute is l...

I bought a used James duff stage 2 lift with no instructions. I need to know where to place the radius arm mounts. Can anyone out there help me. I would really appreciate it!!

Does anyone know if it is possible to eliminate the c-clips on an 8.8? What about a full floating axle, what benifit does this have?

at least someone had a camera handy!

I've been considering the purchase of traction assisting defice for my d35 but can't make up my mind which one to get. I an currently running 31's and 3.55 but plan on bigger and lower in the future. So far most of wheelin has been in the snow and it is not a daily driver. Also it has a mini spooled...

How much do I want for the tcase and tranny? That depends on who has to pull them from the truck, you or me.

Took the bronco for a spin today and on the way home the blinkers and brake lights stopped working. I replaced the fuse for the brake lights but they still do not work. The one for the blinkers keeps popping. As far as i know they both quite working at the same time. Does anyone have any ideas? Thanks

EBSteve told me you might have one. This screwdriver thing is getting a little old, a keyed ignition would be kind of nice for a change. Next time I see you I'll trade you for some ice cold beverages of your chose. Will you be done with your EB in time for hangover run?