Search found 103 matches

by 303lithgow
Fri Sep 09, 2011 7:25 pm
Forum: Bronco Tech
Topic: 1990 B2 fuel cell float replacement, now it doesn't start
Replies: 2
Views: 743

Re: 1990 B2 fuel cell float replacement, now it doesn't star

Hmmm Runs before Fuel gauge and pump were messed with. Maybe something is missing like a ground. Or maybe a fuse poped. Can you hear the fuel pump run momentarily when you switch the key on. Yes I can hear the pump run. When I changed the float I also changed the filler hose because it was cracked ...
by 303lithgow
Fri Sep 09, 2011 3:07 pm
Forum: Bronco Tech
Topic: 1990 B2 fuel cell float replacement, now it doesn't start
Replies: 2
Views: 743

1990 B2 fuel cell float replacement, now it doesn't start

I replaced the fuel cell float because it was leaking. Now the B2 won't start. Not even a little sight of life. I've turned the key on a few times to get pressure back up but nothing. The inertia switch appears to be in the down position. The good part is the fuel guage works and shows 1/4 full whic...
by 303lithgow
Sat Jul 02, 2011 5:53 pm
Forum: Bronco Tech
Topic: Air Conditioning
Replies: 18
Views: 8468

Re: Air Conditioning

Both u guys shush its been 107 the last 2 days and no end in sight here my hubby owns a transmission shop no ac its a huge metal oven I work on cell towers holy crap talk about heat no shade I do have a nice tan now though ill make ya a deal ill swap you for a week lol pretty plz! I look tan but up...
by 303lithgow
Sun Apr 17, 2011 12:56 pm
Forum: Bronco Tech
Topic: flex plate
Replies: 4
Views: 1036

Re: flex plate

The flex plate replaces the flywheel in an automatic transmission.
by 303lithgow
Thu Apr 14, 2011 7:06 pm
Forum: Bronco Tech
Topic: flex plate
Replies: 4
Views: 1036

flex plate

I just had the flex plate blow in my 86 B2. How common is this problem?
by 303lithgow
Sat Oct 16, 2010 12:46 pm
Forum: Member Rides
Topic: My B2
Replies: 6
Views: 2546

Re: My B2

Love the cab clearance lights. Any problems installing them? Did you have to remove the headliner?
by 303lithgow
Sun Aug 22, 2010 1:14 pm
Forum: Bronco Tech
Topic: front hubs overheating
Replies: 2
Views: 775

Re: front hubs overheating

I used my 4wd yesterday and after going back into 2wd my front hubs overheated at freewayt speeds. I was using 4Low if that makes any differance. Any ideas? your in 4X4 on dri pavement,at freewayt speeds and in 4low??? :wtf: :hmmm: :eek: No! I was in 4Low offroad and going about 2 mph. I turned the...
by 303lithgow
Sat Aug 21, 2010 6:12 pm
Forum: Bronco Tech
Topic: front hubs overheating
Replies: 2
Views: 775

front hubs overheating

I used my 4wd yesterday and after going back into 2wd my front hubs overheated at freewayt speeds. I could tell something was wrong and pulled over to check them. I had to wait about half an hour for them to cool before continueing but didn't have any more problems. I had turns the manual hubs free ...
by 303lithgow
Sun Aug 15, 2010 10:37 am
Forum: Bronco Tech
Topic: clutch pedal goes all the way to the floor
Replies: 1
Views: 648

Re: clutch pedal goes all the way to the floor

I was able to solve the problem. The clip holding the clutch pedal to the clutch master cylinder fell off. It took me an hour to find the problem and one minute to fix it.
by 303lithgow
Sat Aug 14, 2010 6:12 pm
Forum: Bronco Tech
Topic: clutch pedal goes all the way to the floor
Replies: 1
Views: 648

clutch pedal goes all the way to the floor

I went out to start the 1990 B2 and when I pushed the clutch it went all the way to the floor without any resistance. I'm wondering if I should look near the pedal or at the transmission? Are these known to break at one point more often then another?
by 303lithgow
Wed Aug 11, 2010 6:19 pm
Forum: Bronco Tech
Topic: Valve Cover Gasket Replacement
Replies: 8
Views: 3659

Re: Valve Cover Gasket Replacement

The real question is how many beers in 6 hours. That's the way I judge my jobs at home. Warranty used to pay 1.2. CP 2.5. I should of told you it may be easier if you pull the ALT. No beers but a dozen cups of coffee and I have a TV and sofa in the garage. Its not like I'm going to get fired if I g...
by 303lithgow
Tue Aug 10, 2010 8:24 pm
Forum: Bronco Tech
Topic: Valve Cover Gasket Replacement
Replies: 8
Views: 3659

Re: Valve Cover Gasket Replacement

Pass. side is the easy side. Remove bolts and hold down spacer (note that there is different spacers for the top and corners) clean the heck out of everything, even the holes. Make sure V/C is flat. Put gasket on V/C side with gasket cinch or spray adhesive. Assemble in reverse order. Oh, put a dab...
by 303lithgow
Tue Aug 10, 2010 6:46 am
Forum: Bronco Tech
Topic: Valve Cover Gasket Replacement
Replies: 8
Views: 3659

Re: Valve Cover Gasket Replacement

Ranger Dave wrote:take the bolts out first
Actually I have to unhook other items first.
by 303lithgow
Mon Aug 09, 2010 4:24 pm
Forum: Bronco Tech
Topic: Valve Cover Gasket Replacement
Replies: 8
Views: 3659

Valve Cover Gasket Replacement

I have the pleasure of replacing the passenger side valve cover gasket. Any good hints?
by 303lithgow
Fri Aug 06, 2010 10:39 am
Forum: Bronco Tech
Topic: what other body would you put on a B2?
Replies: 12
Views: 2436

Re: what other body would you put on a B2?

seannkyle wrote:I had a Ford Courier that would be cool on a b2 frame
Good choice! Would you call it a Courier II? lol