Search found 26 matches

by chucknti
Sun Mar 22, 2009 9:01 pm
Forum: Bronco Tech
Topic: starting issue
Replies: 2
Views: 623

Re: starting issue

i did a frame off resto and forgot to reconnect all the grounds :D ,
thanks anyway
by chucknti
Sun Mar 22, 2009 8:56 pm
Forum: Bronco Tech
Topic: diagnosing problem
Replies: 9
Views: 1516

Re: diagnosing problem

i had the same problem a few years ago. i got in the truck and drove about 3 miles and did the same thing yours did. i would take it off and check the alt again
by chucknti
Sat Mar 21, 2009 9:36 am
Forum: Bronco Tech
Topic: no fuel pressure
Replies: 6
Views: 975

Re: no fuel pressure

OK pulled the tank down and its got a thick layer or rust in it, and the pump screen as been ate away. i went and bought a pump and tank. thanks rangerdave
by chucknti
Sat Mar 21, 2009 3:05 am
Forum: Bronco Tech
Topic: no fuel pressure
Replies: 6
Views: 975

Re: no fuel pressure

no noise comes from it
by chucknti
Fri Mar 20, 2009 12:12 pm
Forum: Chit Chat
Topic: Burn Notice
Replies: 4
Views: 1076

Re: Burn Notice

yea i know i saw that it was a nice xls sport edition man i would still like to have that one.
by chucknti
Fri Mar 20, 2009 12:10 pm
Forum: Chit Chat
Topic: Snow!!
Replies: 8
Views: 1542

Re: Snow!!

its nice here i finally can get out and work on my eb b2
by chucknti
Fri Mar 20, 2009 11:36 am
Forum: Bronco Tech
Topic: no fuel pressure
Replies: 6
Views: 975

Re: no fuel pressure

how do i check the pump in tank without dropping the tank?
the truck sat for almost two years and obviously ran before the previous owner popped the motor.
by chucknti
Thu Mar 19, 2009 1:44 pm
Forum: Bronco Tech
Topic: any tricks on bleeding the breaks?
Replies: 6
Views: 952

Re: any tricks on bleeding the breaks?

Ive always found pb blaster to work the best for me it helped me get rusted exhaust bolts out.
by chucknti
Thu Mar 19, 2009 1:34 pm
Forum: Member Rides
Topic: 1987 diesel Bronco II
Replies: 20
Views: 12315

Re: 1987 diesel Bronco II

i would have never tought of that. awesome keep us posted
by chucknti
Thu Mar 19, 2009 1:30 pm
Forum: Bronco Tech
Topic: Exploded Bronco II
Replies: 6
Views: 1240

Re: Exploded Bronco II

no way they will never fit but when u change your heads make sure your get new head bolts
by chucknti
Thu Mar 19, 2009 1:25 pm
Forum: Bronco Tech
Topic: 1990 bronco II drive line help
Replies: 3
Views: 991

Re: 1990 bronco II drive line help

best thing to do is measure from flange to flange on your axle and t case, and get one made for around 250 to 300 bucks
by chucknti
Thu Mar 19, 2009 1:23 pm
Forum: Bronco Tech
Topic: 90bronco II 4x4 module
Replies: 1
Views: 726

Re: 90bronco II 4x4 module

first off i would try and go to pullapart and get you a new module for around 40 bucks, and you can get another motor for about 20 bucks if you need it
by chucknti
Thu Mar 19, 2009 1:19 pm
Forum: Bronco Tech
Topic: auto locking hub socket?
Replies: 1
Views: 540

Re: auto locking hub socket?

you shouldn't need a socket on auto hubs only manual ones. i just used a magnet to pull the little key out of the space in the nut. i used a pair of channel locks to get the nut loose. hope this helps check out a Chilton manual
by chucknti
Thu Mar 19, 2009 12:32 pm
Forum: Bronco Tech
Topic: Engine and lift swap or body swap
Replies: 6
Views: 1538

Re: Engine and lift swap or body swap

yes they came on the xls sport and also some of the xls had a tube rear bumper and grille guard.